Setup Devices

From Taridium

(Difference between revisions)
Jump to: navigation, search
(Linksys SPA Phones and ATA's)
(Linksys SPA Phones and ATA's)
Line 24: Line 24:
(formerly also known as Sipura)
(formerly also known as Sipura)
-
* Supported Linksys Phones: SPA series phones and analog telephone adapters, PAP2T-NA ATA's etc.
+
* Supported Linksys and Linksys by Cisco Phones: SPA series phones and analog telephone adapters, PAP2T-NA etc.
* Default Provisioning Method: HTTP (path: /var/www/html/prov)
* Default Provisioning Method: HTTP (path: /var/www/html/prov)
* Access Type: anonymous
* Access Type: anonymous

Revision as of 15:39, 7 May 2009

ipbx supports the following devices for auto-provisioning. Any other type of device needs to be setup manually and possibly requires console modifications. If you have a device type with which you need help, please contact Taridium or your authorized reseller.

To access auto-provisioning settings click on ConfigurationAdvanced SetupDevices.

Click on the approriate configure button to enable auto-provisioning for your selected brand. This procedure might take a couple of minutes depending on the provisioning method.

Warning.gif Please take the appropriate precautions when exposing any of the provisioning services to the internet!


Contents

Aastra

Cisco

Linksys SPA Phones and ATA's

(formerly also known as Sipura)

Semi Automated Setup

In case you don't have your network configured for automatic provisioning you can still use the configuration system by telling the phone where to look for the its configuration.

Press the Setup button (this button looks like a page symbol) and scroll Down to Network and select it. You should now see the Current IP information. Enter this IP address into your web browser's address bar. E.g. http://192.168.12.33. On ATA's that don't have an interface, connect a phone to telephone port 1 and dial **** (four asterisks) Then dial: 110 # - This will cause the the ATA to readback the IP address acquired via DHCP.

  1. Click on the Admin Login link on the right hand side. The default configuration will require no password.
  2. Click on the advanced link on the right hand side. This will expose further configuration options.
  3. Click on the 'Provisioning' Tab
  4. Enter The following 'Profile Rule' : http://[ip address of pbx]/prov/spa$MAU.cfg
  5. Click on 'Submit All Changes' at the bottom of the page.
  6. Reboot your phone or enter http://[ip address of phone]]/admin/resync

The phone will reboot shortly and attempt to retrieve the configuration file.

Polycom

XML Applications

For supported XML applications and phones see Phone Browser XML Applications.

Personal tools
Namespaces
Variants
Actions
Toolbox