Setup Devices

From Taridium

(Difference between revisions)
Jump to: navigation, search
(Linksys SPA Phones and ATA's)
 
(11 intermediate revisions not shown)
Line 4: Line 4:
Click on the approriate '''configure''' button to enable [[auto-provisioning]] for your selected brand. This procedure might take a couple of minutes depending on the provisioning method. Depending on the phone type provisioning is done via TFTP, FTP or HTTP(S). Many phones will support multiple protocols.
Click on the approriate '''configure''' button to enable [[auto-provisioning]] for your selected brand. This procedure might take a couple of minutes depending on the provisioning method. Depending on the phone type provisioning is done via TFTP, FTP or HTTP(S). Many phones will support multiple protocols.
 +
 +
'''Alternate Method'''
 +
 +
On the command line you can run 'ipbx-autoprov' to install [[auto-provisioning]] for your specific device.
[[Image:warning.gif]] Please take the appropriate precautions when exposing any of the provisioning services to the internet! An attacker could possibly read a configuration file and start making toll calls through your system.
[[Image:warning.gif]] Please take the appropriate precautions when exposing any of the provisioning services to the internet! An attacker could possibly read a configuration file and start making toll calls through your system.
Line 11: Line 15:
== Aastra ==
== Aastra ==
-
* Supported Aastra phones: SIP Load 5xi series
+
* Supported Aastra phones: SIP Load 67xxi series
* Default Provisioning Method: HTTP (path: /var/www/html/prov as well as /tftpboot)
* Default Provisioning Method: HTTP (path: /var/www/html/prov as well as /tftpboot)
* Access Type: anonymous
* Access Type: anonymous
Line 17: Line 21:
=== Semi Automated Setup ===
=== Semi Automated Setup ===
-
In case you don't have your network configured for automatic provisioning, or if you want configure your phone at a remote location, you can still use the configuration system by telling the phone where to look for the its configuration.  
+
In case you don't have your network configured for automatic provisioning, or if you want configure your phone at a remote location, you can still use the configuration system by telling the phone where to look for its configuration.  
Press the Settings button, sometimes labeled '''Options''' or a wrench symbol and scroll Down to '''3. Phone Status''' and select it. You should now see the '''1. IP&MAC Addresses''' option, select it and note the IP address.
Press the Settings button, sometimes labeled '''Options''' or a wrench symbol and scroll Down to '''3. Phone Status''' and select it. You should now see the '''1. IP&MAC Addresses''' option, select it and note the IP address.
Line 72: Line 76:
   http://[ip address]/admin/reset
   http://[ip address]/admin/reset
 +
 +
The provided files don't cover all settings for all phone types and analog telephone adapters. If you want to create your own specific templates you can download the running XML configuration from any SPA type device using the following URL:
 +
 +
  http://[ip address of device]/admin/spacfg.xml
 +
 
=== Semi Automated Setup ===
=== Semi Automated Setup ===
Line 124: Line 133:
# Select '''Admin Settings'''.
# Select '''Admin Settings'''.
# Select '''Reset to Default'''.
# Select '''Reset to Default'''.
-
# Select '''Reset Local Config'''.
+
# Select '''Reset Local Config or Format File System'''.
 +
 
 +
 
 +
''' Reboot Device '''
 +
 
 +
To reboot phones manually, press and hold the following keys until the phone beeps:
 +
 
 +
SoundPoint IP 300: Hold down the ''Volume-'', ''Volume+'', ''Hold'' and ''Redial'' buttons simultaneously.<br>
 +
SoundPoint IP 3xx: Hold down the ''Volume-'', ''Volume+'', ''Hold'' and ''Do Not Disturb'' buttons simultaneously.<br>
 +
SoundPoint IP 330: Hold down the ''Volume-'', ''Volume+'', ''Hold'' and ''Speaker'' buttons simultaneously.<br>
 +
SoundPoint IP 430: Hold down the ''Volume-'', ''Volume+'', ''Hold'' and ''Messages'' buttons simultaneously.<br>
 +
SoundPoint IP 5xx: Hold down the ''Volume-'', ''Volume+'', ''Hold'' and ''Messages'' buttons simultaneously.<br>
 +
SoundPoint IP 6xx: Hold down the ''Volume-'', ''Volume+'', ''Mute'' and ''Messages'' buttons simultaneously.<br>
 +
SoundStation IP 4xxxx,6xxx: Hold down the 4, 6 keys and Soft Key 2 simultaneously.
'''Reset Device Settings'''
'''Reset Device Settings'''
-
IP 30x: Hold down the 4, 6, 8 and * keys simultaneously.<br>
+
SoundPoint IP 3xx: Hold down the 4, 6, 8 and * keys simultaneously.<br>
-
IP 430: Hold down the 1, 3, 5 and 7 keys simultaneously.<br>
+
SoundPoint IP 430: Hold down the 1, 3, 5 and 7 keys simultaneously.<br>
-
IP 50x: Hold down the 4, 6, 8 and * keys simultaneously.<br>
+
SoundPoint IP 5xx: Hold down the 4, 6, 8 and * keys simultaneously.<br>
-
IP 60x: Hold down the 4, 6, 8 and * keys simultaneously.
+
SoundPoint IP 6xx: Hold down the 4, 6, 8 and * keys simultaneously.<br>
 +
SoundStation IP 4xxx, 6xxx, 7xxx: Hold down the 6, 8, and * keys simultaneously.<br>
NOTE: This method will require the Administrator Password(456)
NOTE: This method will require the Administrator Password(456)
Line 140: Line 163:
* Default Provisioning Method: HTTP (path: /var/www/html/prov)
* Default Provisioning Method: HTTP (path: /var/www/html/prov)
* Access Type: anonymous
* Access Type: anonymous
 +
 +
Note the default credentials for ipbx Snom templates:
 +
 +
http user: admin<br>
 +
http password: ipbxsnom<br>
 +
admin mode password : 55500<br>
== XML Applications ==
== XML Applications ==
-
For supported XML applications and phones see [[Phone_Browser_XML_Applications|Phone Browser XML Applications]].
+
For supported XML applications and phones see [[Phone_Browser_XML_Applications|Phone Browser XML Applications]]. Most applications will be listed in the main XML Menu for the corresponding phone type.
 +
 
 +
=== Queue RSS Feed ===
 +
 
 +
''This feature is available as of ipbx 2.0.5-i.''
 +
 
 +
The queue RSS feed displays a RSS 2.0 feed for a selected queue. Returned data includes:
 +
 
 +
* number of available agents
 +
* waiting calls
 +
* connected calls
 +
* agent ratio
 +
 
 +
The RSS feed script will take a single argument '''queue''' to specify the queue, if not specified the first queue will be returned.
 +
 
 +
Example calling the Queue RSS feed:
 +
 
 +
  http://192.168.23.2/ipbx/xml/rss-queue.xml?queue=myQueue

Latest revision as of 18:35, 3 February 2014

ipbx supports the following devices for auto-provisioning. Any other type of device needs to be setup manually and possibly requires console modifications. If you have a device type with which you need help, please contact Taridium or your authorized reseller. Check the How To section for examples of manual setups for unsupported phone types.

To access auto-provisioning settings click on ConfigurationAdvanced SetupDevices.

Click on the approriate configure button to enable auto-provisioning for your selected brand. This procedure might take a couple of minutes depending on the provisioning method. Depending on the phone type provisioning is done via TFTP, FTP or HTTP(S). Many phones will support multiple protocols.

Alternate Method

On the command line you can run 'ipbx-autoprov' to install auto-provisioning for your specific device.

Warning.gif Please take the appropriate precautions when exposing any of the provisioning services to the internet! An attacker could possibly read a configuration file and start making toll calls through your system.


Contents

Aastra

Semi Automated Setup

In case you don't have your network configured for automatic provisioning, or if you want configure your phone at a remote location, you can still use the configuration system by telling the phone where to look for its configuration.

Press the Settings button, sometimes labeled Options or a wrench symbol and scroll Down to 3. Phone Status and select it. You should now see the 1. IP&MAC Addresses option, select it and note the IP address.

  1. Enter this IP address into your web browser's address bar. E.g. http://192.168.12.33.
  2. Enter the default username admin and password 22222.
  3. Click on the Advanced SettingsConfiguration Server at the bottom of the menu.
  4. Select HTTP as Download Protocol.
  5. Enter your ipbx IP address into the HTTP Server field.
  6. Enter prov into the HTTP Path field.
  7. Click on Save Settings.
  8. Click on OperationReset.
  9. Click on Restart Phone.

The phone will reboot shortly and attempt to retrieve the configuration file from your ipbx system.

Cisco

Standard provisioning currently only support non-XML configuration files. This excludes Cisco Unified IP Phone 7965G, 7970G and others. See the Adding Unsupported Phones page for further details.

Linksys SPA (Cisco Small Business) Phones and ATA's

(formerly also known as Sipura)

Cisco/Linksys phones are meant to be provisioned by HTTP, but might initially only pick up the default pre-provisioning file from the TFTP server (default behavior of factory phones). This requires a second reboot.

  1. Initial boot: Phone or ATA picks up init.cfg file with instructions to use the HTTP profile
  2. Second boot: Phone/ATA picks up it's actual configuration file.

Contents of Pre Provisioning File

 <flat-profile>  
 
   <Profile_Rule ua="na">http://%%eth0%%/prov/spa$MAU.cfg
   </Profile_Rule>
 
 </flat-profile>


Where %%eth0%% is the variable which will automatically be replaced with the IP address of your ipbx system.

You can easily reboot your Linksys ATA or phone by entering the following URL into your webbrowser:

 http://[ip address]/admin/reboot

or

 http://[ip address]/admin/reset

The provided files don't cover all settings for all phone types and analog telephone adapters. If you want to create your own specific templates you can download the running XML configuration from any SPA type device using the following URL:

 http://[ip address of device]/admin/spacfg.xml
 

Semi Automated Setup

In case you don't have your network configured for automatic provisioning, or if you want configure your phone at a remote location, you can still use the configuration system by telling the phone where to look for the its configuration.

Press the Setup button (this button looks like a page symbol) and scroll Down to Network and select it. You should now see the Current IP information. On ATA's that don't have an interface, connect a phone to telephone port 1 and dial **** (four asterisks) Then dial: 110 # - This will cause the the ATA to readback the IP address acquired via DHCP.

  1. Enter this IP address into your web browser's address bar. E.g. http://192.168.12.33.
  2. Click on the Admin Login link on the right hand side. The default configuration will require no password.
  3. Click on the advanced link on the right hand side. This will expose further configuration options.
  4. Click on the 'Provisioning' Tab
  5. Enter The following 'Profile Rule' : http://[ip address of pbx]/prov/spa$MAU.cfg
  6. Click on 'Submit All Changes' at the bottom of the page.
  7. Reboot your phone or enter http://[ip address of phone]/admin/resync

The phone will reboot shortly and attempt to retrieve the configuration file.

Polycom

Semi Automated Setup

In case you don't have your network configured for automatic provisioning, or if you want configure your phone at a remote location, you can still use the configuration system by telling the phone where to look for the its configuration.

Polycom phones need to setup directly on the phone for semi-automated provisioning:

  1. Press the Menu key.
  2. Select Settings.
  3. Select Advanced.
  4. Enter in your admin password to the phone (456). Hit the Enter soft key.
  5. Select Admin Settings.
  6. Select Network Configuration.
  7. Select Server Menu.
  8. Enter the IP address of your ipbx system.
  9. Hit the Exit Soft key until you can select Save Config
  10. Reboot your phone

Resetting your Polycom Phone

Reset Local Config

  1. Press the Menu key.
  2. Select Settings.
  3. Select Advanced.
  4. Enter in your admin password to the phone (456). Hit the Enter soft key.
  5. Select Admin Settings.
  6. Select Reset to Default.
  7. Select Reset Local Config or Format File System.


Reboot Device

To reboot phones manually, press and hold the following keys until the phone beeps:

SoundPoint IP 300: Hold down the Volume-, Volume+, Hold and Redial buttons simultaneously.
SoundPoint IP 3xx: Hold down the Volume-, Volume+, Hold and Do Not Disturb buttons simultaneously.
SoundPoint IP 330: Hold down the Volume-, Volume+, Hold and Speaker buttons simultaneously.
SoundPoint IP 430: Hold down the Volume-, Volume+, Hold and Messages buttons simultaneously.
SoundPoint IP 5xx: Hold down the Volume-, Volume+, Hold and Messages buttons simultaneously.
SoundPoint IP 6xx: Hold down the Volume-, Volume+, Mute and Messages buttons simultaneously.
SoundStation IP 4xxxx,6xxx: Hold down the 4, 6 keys and Soft Key 2 simultaneously.

Reset Device Settings

SoundPoint IP 3xx: Hold down the 4, 6, 8 and * keys simultaneously.
SoundPoint IP 430: Hold down the 1, 3, 5 and 7 keys simultaneously.
SoundPoint IP 5xx: Hold down the 4, 6, 8 and * keys simultaneously.
SoundPoint IP 6xx: Hold down the 4, 6, 8 and * keys simultaneously.
SoundStation IP 4xxx, 6xxx, 7xxx: Hold down the 6, 8, and * keys simultaneously.

NOTE: This method will require the Administrator Password(456)

Snom

Note the default credentials for ipbx Snom templates:

http user: admin
http password: ipbxsnom
admin mode password : 55500

XML Applications

For supported XML applications and phones see Phone Browser XML Applications. Most applications will be listed in the main XML Menu for the corresponding phone type.

Queue RSS Feed

This feature is available as of ipbx 2.0.5-i.

The queue RSS feed displays a RSS 2.0 feed for a selected queue. Returned data includes:

The RSS feed script will take a single argument queue to specify the queue, if not specified the first queue will be returned.

Example calling the Queue RSS feed:

 http://192.168.23.2/ipbx/xml/rss-queue.xml?queue=myQueue
Personal tools
Namespaces
Variants
Actions
Toolbox