Setup Devices

From Taridium

Revision as of 15:38, 7 May 2009 (view source) Webmaster (Talk | contribs) (→Linksys) ← Older edit		Revision as of 15:38, 7 May 2009 (view source) Webmaster (Talk | contribs) (→Linksys SPA Phones and ATA's) Newer edit →
Line 24:		Line 24:
	(formerly also known as Sipura)		(formerly also known as Sipura)
-	* Supported Linksys Phones: SPA series phones and analog telephone adapters.	+	* Supported Linksys Phones: SPA series phones and analog telephone adapters, PAP2T-NA ATA's etc.
	* Default Provisioning Method: HTTP (path: /var/www/html/prov)		* Default Provisioning Method: HTTP (path: /var/www/html/prov)
	* Access Type: anonymous		* Access Type: anonymous

---

Revision as of 15:38, 7 May 2009

ipbx supports the following devices for auto-provisioning. Any other type of device needs to be setup manually and possibly requires console modifications. If you have a device type with which you need help, please contact Taridium or your authorized reseller.

To access auto-provisioning settings click on Configuration → Advanced Setup → Devices.

Click on the approriate configure button to enable auto-provisioning for your selected brand. This procedure might take a couple of minutes depending on the provisioning method.

Please take the appropriate precautions when exposing any of the provisioning services to the internet!

Contents 1 Aastra 2 Cisco 3 Linksys SPA Phones and ATA's 3.1 Semi Automated Setup 4 Polycom 5 XML Applications

Aastra

• Supported Aastra phones: SIP Load 5xi series
• Default Provisioning Method: HTTP (path: /var/www/html/prov as well as /tftpboot)
• Access Type: anonymous

Cisco

• Supported Cisco Phones: 79XX Series (SIP only)
• Default Provisioning Method: TFTP (path: /tftpboot)
• Access Type: anonymous

Linksys SPA Phones and ATA's

(formerly also known as Sipura)

• Supported Linksys Phones: SPA series phones and analog telephone adapters, PAP2T-NA ATA's etc.
• Default Provisioning Method: HTTP (path: /var/www/html/prov)
• Access Type: anonymous

Semi Automated Setup

In case you don't have your network configured for automatic provisioning you can still use the configuration system by telling the phone where to look for the its configuration.

Press the Setup button (this button looks like a page symbol) and scroll Down to Network and select it. You should now see the Current IP information. Enter this IP address into your web browser's address bar. E.g. http://192.168.12.33. On ATA's that don't have an interface, connect a phone to telephone port 1 and dial **** (four asterisks) Then dial: 110 # - This will cause the the ATA to readback the IP address acquired via DHCP.

1. Click on the Admin Login link on the right hand side. The default configuration will require no password.
2. Click on the advanced link on the right hand side. This will expose further configuration options.
3. Click on the 'Provisioning' Tab
4. Enter The following 'Profile Rule' : http://[ip address of pbx]/prov/spa$MAU.cfg
5. Click on 'Submit All Changes' at the bottom of the page.
6. Reboot your phone or enter http://[ip address of phone]]/admin/resync

The phone will reboot shortly and attempt to retrieve the configuration file.

Polycom

• Supported Polycom Phones: Polycom SoundPoint IP and SoundStation IP
• Default Provisioning Method: FTP (path: /home/PlcmSpIp)
• Access Type: authenticated
• Access User: PlcmSpIp

XML Applications

For supported XML applications and phones see Phone Browser XML Applications.