Setup Devices

From Taridium

Revision as of 15:57, 7 May 2009 (view source) Webmaster (Talk | contribs) (→Semi Automated Setup) ← Older edit		Revision as of 14:36, 12 May 2009 (view source) Webmaster (Talk | contribs) (→Polycom) Newer edit →
Line 69:		Line 69:
	* Access Type: authenticated		* Access Type: authenticated
	* Access User: PlcmSpIp		* Access User: PlcmSpIp
		+
		+	=== Resetting your Polycom Phone ===
		+
		+	'''Reset Local Config'''
		+	Step 1: Press the 'Menu' key.<br>
		+	Step 2: Select 'Settings'.<br>
		+	Step 3: Select 'Advanced'.<br>
		+	Step 4: Enter in your admin password to the phone (456). Hit the Enter soft key.<br>
		+	Step 5: Select 'Admin Settings'.<br>
		+	Step 6: Select 'Reset to Default'.<br>
		+	Step 7: Select 'Reset Local Config'.
		+
		+	'''Reset Device Settings'''
		+
		+	IP 30x: Hold down the 4, 6, 8 and * keys simultaneously.<br>
		+	IP 430: Hold down the 1, 3, 5 and 7 keys simultaneously.<br>
		+	IP 50x: Hold down the 4, 6, 8 and * keys simultaneously.<br>
		+	IP 60x: Hold down the 4, 6, 8 and * keys simultaneously.
		+
		+	NOTE: This method will require the Administrator Password(456)
	== Snom ==		== Snom ==

---

Revision as of 14:36, 12 May 2009

ipbx supports the following devices for auto-provisioning. Any other type of device needs to be setup manually and possibly requires console modifications. If you have a device type with which you need help, please contact Taridium or your authorized reseller.

To access auto-provisioning settings click on Configuration → Advanced Setup → Devices.

Click on the approriate configure button to enable auto-provisioning for your selected brand. This procedure might take a couple of minutes depending on the provisioning method.

Please take the appropriate precautions when exposing any of the provisioning services to the internet!

Contents 1 Aastra 1.1 Semi Automated Setup 2 Cisco 3 Linksys SPA Phones and ATA's 3.1 Semi Automated Setup 4 Polycom 4.1 Resetting your Polycom Phone 5 Snom 6 XML Applications

Aastra

• Supported Aastra phones: SIP Load 5xi series
• Default Provisioning Method: HTTP (path: /var/www/html/prov as well as /tftpboot)
• Access Type: anonymous

Semi Automated Setup

In case you don't have your network configured for automatic provisioning, or if you want configure your phone at a remote location, you can still use the configuration system by telling the phone where to look for the its configuration.

Press the Settings button, sometimes labeled Options or a wrench symbol and scroll Down to 3. Phone Status and select it. You should now see the 1. IP&MAC Addresses option, select it and note the IP address.

1. Enter this IP address into your web browser's address bar. E.g. http://192.168.12.33.
2. Enter the default username admin and password 22222.
3. Click on the Advanced Settings → Configuration Server at the bottom of the menu.
4. Select HTTP as Download Protocol.
5. Enter your ipbx IP address into the HTTP Server field.
6. Enter prov into the HTTP Path field.
7. Click on Save Settings.
8. Click on Operation → Reset.
9. Click on Restart Phone.

The phone will reboot shortly and attempt to retrieve the configuration file from your ipbx system.

Cisco

• Supported Cisco Phones: 79XX Series (SIP only)
• Default Provisioning Method: TFTP (path: /tftpboot)
• Access Type: anonymous

Linksys SPA Phones and ATA's

(formerly also known as Sipura)

• Supported Linksys and Linksys by Cisco Phones: SPA series phones and analog telephone adapters, PAP2T-NA etc.
• Default Provisioning Method: HTTP (path: /var/www/html/prov)
• Access Type: anonymous

Semi Automated Setup

In case you don't have your network configured for automatic provisioning, or if you want configure your phone at a remote location, you can still use the configuration system by telling the phone where to look for the its configuration.

Press the Setup button (this button looks like a page symbol) and scroll Down to Network and select it. You should now see the Current IP information. On ATA's that don't have an interface, connect a phone to telephone port 1 and dial **** (four asterisks) Then dial: 110 # - This will cause the the ATA to readback the IP address acquired via DHCP.

1. Enter this IP address into your web browser's address bar. E.g. http://192.168.12.33.
2. Click on the Admin Login link on the right hand side. The default configuration will require no password.
3. Click on the advanced link on the right hand side. This will expose further configuration options.
4. Click on the 'Provisioning' Tab
5. Enter The following 'Profile Rule' : http://[ip address of pbx]/prov/spa$MAU.cfg
6. Click on 'Submit All Changes' at the bottom of the page.
7. Reboot your phone or enter http://[ip address of phone]/admin/resync

The phone will reboot shortly and attempt to retrieve the configuration file.

Polycom

• Supported Polycom Phones: Polycom SoundPoint IP and SoundStation IP
• Default Provisioning Method: FTP (path: /home/PlcmSpIp)
• Access Type: authenticated
• Access User: PlcmSpIp

Resetting your Polycom Phone

Reset Local Config Step 1: Press the 'Menu' key.
Step 2: Select 'Settings'.
Step 3: Select 'Advanced'.
Step 4: Enter in your admin password to the phone (456). Hit the Enter soft key.
Step 5: Select 'Admin Settings'.
Step 6: Select 'Reset to Default'.
Step 7: Select 'Reset Local Config'.

Reset Device Settings

IP 30x: Hold down the 4, 6, 8 and * keys simultaneously.
IP 430: Hold down the 1, 3, 5 and 7 keys simultaneously.
IP 50x: Hold down the 4, 6, 8 and * keys simultaneously.
IP 60x: Hold down the 4, 6, 8 and * keys simultaneously.

NOTE: This method will require the Administrator Password(456)

Snom

• Supported Snom phones: Snom 3xx/8xx and Snom m3
• Default Provisioning Method: HTTP (path: /var/www/html/prov)
• Access Type: anonymous

XML Applications

For supported XML applications and phones see Phone Browser XML Applications.