Trunks
From Taridium
Trunks are configuration elements that define how ipbx communicates with outside phone systems. Multi Site trunking does not require additional trunk configuration and communication/authentication is completely automated via master settings.
Contents |
VoIP Trunks
VoIP Trunks can either be SIP or IAX2 based. While trunks are very similar to channels, their configuration is supposed to be static and take care of interconnection between systems.
Trunks List
To view the trunks list, click on Configuration → VoIP Trunks.
This interaction displays all your configured VoIP trunks. Click on the 
icon to edit a trunk, or click on the 
icon to remove the trunk. Click on ping to find out whether the host is alive or not. An appropriate signaling packet will be sent and response will be expected. Note that a successful reply is no guarantee for correct trunk configuration.
Add Trunk
To add a trunk, click on Configuration → VoIP Trunks and click on add SIP trunk or add IAX trunk.
Trunks are usually static (static IP address). For detailed explanation of trunk parameter see adding SIP channels or adding IAX channels.
Registrations List
The registration list shows you with which other servers your ipbx is registered to. This behavior is akin to a phone/client registered to ipbx.
To view your registrations click on Configuration → VoIP Trunks → Registrations.
This interaction will display your registration settings and show whether your system is properly registered with the remote host:
- File:Ok.gif OK, registered
-
FAIL Not registered / registration lost
Add Registration
To add a trunk, click on Configuration → VoIP Trunks → Registrations and click on add SIP registration or add IAX registration.
