Bria for iPhone Setup

From Taridium

Revision as of 15:21, 11 July 2011 by Webmaster (Talk | contribs)
Jump to: navigation, search

Instructions are based on Counterpath's Bria for iPhone version 1.2.1 build 4191 or higher. The application can be purchased in Apple's App store for USD 7.99. We recommend the 'Premium Feature' G.729 Codec which can be purchased in the application itself.

Contents

Configuration

Account Details

You will need your SIP username and password as configured on your ipbx system:

SIP Proxy IP address or DNS name of your ipbx system. Note that this is most likely your public IP
Username as set in SIP Channels → Username
Password as set in SIP Channels → Secret

Bria-sip.png

We suggest you always use strong SIP passwords/secrets, especially for accounts that are exposed to the public internet.

Bria Configuration

Bria-config-1.png

1. Configure a new account with your account details:

Bria ipbx value
Account Name Username
Display as Username
Username Username
Password Password
Domain SIP Proxy
Enabled On
Incoming Calls On


2. Add the account by tapping save in the upper right hand corner.

Bria-config-2.png

3. Hit the green Register button to register your account.

Bria-config-3.png

If the client registers properly, you should be able to dial in the same fashion as any other client on your ipbx system.

Low Bandwidth Codec

The Bria client also supports a lower bandwidth codec (G.729) This feature can be purchased under Settings Premium Features. This is recommended when using your client over 3G networks.

You can configure your phone to use this codec only when in 3G coverage.

Personal tools
Namespaces
Variants
Actions
Toolbox