Registering ipbx

From Taridium

Revision as of 15:03, 13 July 2009

License Keys

If you haven't received a licensing key with your system. Please contact licensing@taridium.com and request a new license key. Keys are only available to pre-registered customers. Keys can be purchased from Taridium (ipbx enterprise solution) or through an authorized reseller (ipbx eXpress).

Registering

To register your copy of ipbx, open the root directory of your webserver. E.g. http://192.168.12.1/ This will prompt you for the license key and the MAC address of your server. Note that once a copy is registered the registration information is locked to one of your server's network interface MAC addresses. It does not matter which one it is, as long as the corresponding interface is available. Once registered it is not possible to re-request the same license. To reset used licenses, please contact licensing@taridium.com with your current license code, reason for reset and contact information.

If you change motherboards or change your network adaptor you will need to reset your license. Please arrange with Taridium so you can re-use your existing license on your new hardware.

To reset (remove) your license and replace it go to Configuration → Advanced Setup → Maintenance and click on reset license - or from the command line type:

 [ipbx conf]# ipbx-config

 ************************************************************
                                                             
   ipbx 2.0-a Configuration                      
   (c) 2009 taridium                                         
                                                             
 ************************************************************ 
  
 
 Select Configuration Option:
 
 1 <- Configure ipbx for the first time and use default
      configuration
 2 <- Create full database backup
 3 <- Fix file system permissions
 4 <- Restore default ipbx database (will erase all settings)
 5 <- Reset admin password
 6 <- Upgrade ipbx database (safe mode)
 7 <- Reset License (cannot be undone)
 
 0 <- Exit

Select option 7 to reset your license.

Once your system has been registered correctly you can also perform a system update to check if there are any new packages available. Follow the instructions described carefully, if there are any problems please contact Taridium Support via e-mail support@taridium.com.

Next Steps

• Initial Configuration