Feature Settings
From Taridium
(→Voicemail Delay) |
|||
| Line 1: | Line 1: | ||
| - | Feature Settings control additional features for a specific extension. | + | Feature Settings control additional features for a specific extension. More features are available in the [[End User Panel]]. |
===Supervisor Console === | ===Supervisor Console === | ||
Revision as of 19:29, 7 May 2009
Feature Settings control additional features for a specific extension. More features are available in the End User Panel.
Contents |
Supervisor Console
The supervisor console allows users to view other users on the phone and control calls via the End User Panel. This feature is disabled by default.
Outbound Calling
Allows you to control outbound calling permissions. By default all users can place off-system calls. If you check has restricted extension the user will not be able to place any off-system calls. This setting applies to the user's phone. If you check is allowed to dial out with Voicemail Box & PIN the user will be able to place off-system calls from any phone. This setting applies to the users permissions. Both settings can be controlled individually.
Call Forwarding & Follow-Me
Click on clear settings to remove any call forwarding or follow-me settings as configured in the End User Panel.
Call Screening & Blocking
Click on clear settings to remove any call blocking or screening settings as configured in the End-User Panel.
Voicemail Delay
The Voicemail Delay presets the number of seconds until the extension goes to Voicemail. This setting can also be adjusted on the end-user panel.
End-User Panel Access
Selects how authentication is performed when accessing the end user panel.
- Authentication via Voicemail PIN (default) will use the set PIN as means to authenticate the user.
- Authentication via password will use the alternate password as means to authenticate the user. This is generally more secure and should be considered if you are planning to expose the web interface to the public internet.
Primary Channel / Roaming
This interaction allows you to specify the primary channel for the user. As per default the user channel will be the same as the user extension. Any other setting will be considered a roaming extension. This means calls routed to the user extension will be sent to the selected channel. Note that calls from that channel (phone) will also appear as coming from the roaming extension.
