Auto-provisioning
From Taridium
(Difference between revisions)
| Line 4: | Line 4: | ||
ipbx uses almost exclusively the phone MAC address to identify a phone. This address is usually also part of the configuration file name. | ipbx uses almost exclusively the phone MAC address to identify a phone. This address is usually also part of the configuration file name. | ||
| + | |||
| + | See also [[Setup_Devices|Setup Devices]] | ||
== Auto Provisioning Process == | == Auto Provisioning Process == | ||
Revision as of 17:35, 29 December 2008
Auto provisioning allows you to connect your phones to ipbx without the need for manual configuration.
Proper auto-provisioning usually requires special DHCP configuration and correct device templates.
ipbx uses almost exclusively the phone MAC address to identify a phone. This address is usually also part of the configuration file name.
See also Setup Devices
Auto Provisioning Process
- User is created and along with it a file identified by the phone MAC address. This file contains SIP/IAX registration information and other phone configuration details.
- Phone is connected to the network and requests an IP address via DHCP
- DHCP server sends IP address and TFTP Boot Server information (usually ipbx IP address)
- Phone uses DHCP boot server to download configuration file via TFTP/FTP/HTTP
- Phone uses downloaded information to register with ipbx
