Troubleshooting

From Taridium

Revision as of 17:10, 2 December 2008 by Webmaster (Talk | contribs)
Jump to: navigation, search

Contents

Installation

Ioncube Loader

Failed loading /usr/local/php-ioncube/ioncube/ioncube_loader_lin_5.1.so: /usr/local/php-ioncube/ioncube/ioncube_loader_lin_5.1.so: cannot restore segment prot after reloc: Permission denied


Try disabling SELinux in /etc/selinux/config

 SELINUX=disabled

To make this active you can either re-start your server or enter the following command:

 [root@pbx ~]#  setenforce 0


Conferencing

Invalid Conference Room

Ipbx claims the conference room number is invalid. This is usually a problem with the conferencing timing source. Meetme conferencing requires a timing source, either in the form of a Zaptel compatible timing source or using the pseudo timing device ztdummy.

 [root@ipbx ~]# service asterisk stop
 [root@ipbx ~]# modprobe ztdummy
 [root@ipbx ~]# cat /var/log/messages

and check for any errors, if you get an error message regarding the kernel version, you will have to re-compile the zaptel source for your kernel. Use our pre-compilation package zaptel-compile by entering

 [root@ipbx ~]# yum install zaptel compile

and try the modprobe command again. If there are no error you can start Asterisk again.

 [root@ipbx ~]# service asterisk start

To configure zaptel to start the timing source at boot edit /etc/sysconfig/zaptel and uncomment the appropriate line.

Personal tools
Namespaces
Variants
Actions
Toolbox