Channels

From Taridium

(Difference between revisions)
Jump to: navigation, search
Line 5: Line 5:
The SIP Channel Module enables ipbx to communicate via VOIP with SIP telephones and exchanges. These are usually SIP clients. Trunks and other static end-points are usually configured separately.
The SIP Channel Module enables ipbx to communicate via VOIP with SIP telephones and exchanges. These are usually SIP clients. Trunks and other static end-points are usually configured separately.
 +
The SIP channels interface lists all SIP channels that are configured on the system. The system will automatically update the IP address and the expiry time on dynamically registered channels. Move your mouse pointer over the expiry time to see more details about the registration.
 +
=== Adding a SIP Channel ===
 +
 +
In order to add a SIP channel click on the '''add channel''' button at the bottom of the page.
 +
Taridium's ipbx supports a powerful templating engine that comes pre-loaded with common SIP phones.
 +
 +
Click on '''load template''' to load the template settings and change the other settings accordingly.
 +
 +
In order to create the appropriate text configuration file four auto-provisioning you will need to either select the MAC address of the phone or select it from your DHCP server. Unused MAC addresses will show up in 'green'. See also System → Devices and Channels → SIP Channels → Templates.
 +
 +
Note that the MAC address needs to be entered when the channel is created and cannot be applied retroactively!
== IAX Channels ==
== IAX Channels ==
The IAX Channel Module enables ipbx to communicate via VOIP with IAX telephones and exchanges. Only IAX2 communication is supported at this point. Trunks and other static end-points are usually configured separately.
The IAX Channel Module enables ipbx to communicate via VOIP with IAX telephones and exchanges. Only IAX2 communication is supported at this point. Trunks and other static end-points are usually configured separately.

Revision as of 15:25, 2 December 2008

Channels specify how an end-point communicates with ipbx.

SIP Channels

The SIP Channel Module enables ipbx to communicate via VOIP with SIP telephones and exchanges. These are usually SIP clients. Trunks and other static end-points are usually configured separately.

The SIP channels interface lists all SIP channels that are configured on the system. The system will automatically update the IP address and the expiry time on dynamically registered channels. Move your mouse pointer over the expiry time to see more details about the registration.


Adding a SIP Channel

In order to add a SIP channel click on the add channel button at the bottom of the page. Taridium's ipbx supports a powerful templating engine that comes pre-loaded with common SIP phones.

Click on load template to load the template settings and change the other settings accordingly.

In order to create the appropriate text configuration file four auto-provisioning you will need to either select the MAC address of the phone or select it from your DHCP server. Unused MAC addresses will show up in 'green'. See also System → Devices and Channels → SIP Channels → Templates.

Note that the MAC address needs to be entered when the channel is created and cannot be applied retroactively!

IAX Channels

The IAX Channel Module enables ipbx to communicate via VOIP with IAX telephones and exchanges. Only IAX2 communication is supported at this point. Trunks and other static end-points are usually configured separately.

Personal tools
Namespaces
Variants
Actions
Toolbox