BLF

From Taridium

(Difference between revisions)
Jump to: navigation, search
(Phone Configuration)
(Phone Configuration)
Line 54: Line 54:
==Phone Configuration==
==Phone Configuration==
-
In this example we configure the Aastra 57i phone to indicate whether a phone is busy or ringing:
+
In this example we configure the Aastra 57i phone to indicate whether a phone is busy or ringing. This is just an example with a specific phone, please consult the vendor documentation for more details.
# Identify your phone's IP address (e.g. using ipbx or on the phone itself)
# Identify your phone's IP address (e.g. using ipbx or on the phone itself)
Line 63: Line 63:
# Click on '''Save Settings'''
# Click on '''Save Settings'''
-
Please consult the vendor documentation for more details.
+
 
 +
[http://www.aastratelecom.com/support Aastra Support]<br>
 +
[http://www.cisco.com/support Cisco IP Phone Support]<br>
 +
[http://www.cisco.com/cisco/web/solutions/small_business/cisco_small_business/index.html Cisco SPA Support]<br>
 +
[http://www.polycom.com/support/voice Polycom Voice Products Support]<br>
 +
[http://www.snom.com/en/support Snom Support]<br>

Revision as of 19:52, 4 October 2010

ipbx supports extension presence/status indication on wide variety of SIP devices. This feature is quite often referred to as busy lamp field (BLF). Not all phones do support BLF, some only do partially or using a non-SIP firmware load (e.g. Cisco 79XX series phones). Taridium recommends Aastra and Polycom phones for BLF functionality. Some phones such as the Polycom phones require additional configuration, which is provided when using the ipbx default templates.

Contents

SIP General Settings

In order for BLF to work correctly you will need to make sure the following settings in your general SIP configuration are enabled. Go to SystemSIP ChannelsGeneral Settings or using the Manual Editor and enable:

 allowsubscribe = yes
 notifyringing = yes
 limitonpeers = yes

This will tell ipbx to indicate ringing and busy states to subscribers.

SIP Channel Settings

Go to SystemSIP ChannelsGeneral Settings and make sure each phone you want to monitor has a call-limit set. For each phone that is supposed to monitor other extensions/phones, make sure the Subscribe Context is set to subs.

Blf-chan.png

Dialplan Hints

For ipbx to know about the monitored extensions you will need to add each extension as a hint to the dialplan. If you simply would like to monitor all your user extensions, simply turn on automatic hint management. This will automatically create a [subs] context in the dialplan and create hints for each monitored extension.

 [subs]
 exten => 4002,hint,SIP/4002
 exten => 4012,hint,SIP/4012
 exten => 5007,hint,SIP/5007
 exten => 5011,hint,SIP/5011
 exten => 5012,hint,SIP/5012
 exten => 5015,hint,SIP/5015
 ...

Monitoring Parked Calls

Add the following to your inside context in the Manual Editor:

 [inside]
 ...
 include => parkedcalls
 exten => 701,1,ParkedCall(701)
 exten => 702,1,ParkedCall(702)
 exten => 703,1,ParkedCall(703)
 exten => 704,1,ParkedCall(704)
 ...

Add the following line(s) to the subscriptions context in the Manual Editor:

 [subs]
 ...
 exten => 701,hint,park:701@parkedcalls 
 exten => 702,hint,park:702@parkedcalls 
 exten => 703,hint,park:703@parkedcalls 
 exten => 704,hint,park:704@parkedcalls 

Phone Configuration

In this example we configure the Aastra 57i phone to indicate whether a phone is busy or ringing. This is just an example with a specific phone, please consult the vendor documentation for more details.

  1. Identify your phone's IP address (e.g. using ipbx or on the phone itself)
  2. Go to the phone's configuration page, e.g. http://10.1.1.212
  3. Enter the username and password (admin/2222)
  4. Click on the Softkeys and XML link and select the key/lamp you would like to assign
  5. Select type BLF and enter the extension
  6. Click on Save Settings


Aastra Support
Cisco IP Phone Support
Cisco SPA Support
Polycom Voice Products Support
Snom Support

Personal tools
Namespaces
Variants
Actions
Toolbox