Advanced Setup: Configuration

From Taridium

Revision as of 19:32, 11 November 2008 by Webmaster (Talk | contribs)
Jump to: navigation, search

Contents

System Setup

To perform the basic system setup, go to Advanced Setup → Configuration

System Name

It is advisable to identify your system with a simple name. This will optionally be displayed on both administrator and user panels (display in header)

ipbx IP Address

This is the IP address or fully qualified domain name of your PBX server. If you have a public IP address assigned or port forwarding enabled, use your external IP address.

End User Panel

The End User Panel settings control access and features for the End User Interface. The end user interface can be accessed via http://myipaddress/user, where myipaddress is your server.

Voicemail

Display Voicemail PIN's in plain text will display Voicemail PIN's in plain text in the administrator interface. See System → Voicemail → Mailboxes.

Default PIN Mode When creating users, ipbx will automatically assign Voicemail PIN's to users. These can be either the same as the mailbox number or a random 4 digit number. See System → Voicemail → Mailboxes.

System Default Caller ID

The system Default Caller ID will be used whenever there is no preset default caller ID.

Dialing

With Automatically transform dialed numbers to E.164 syntax ipbx will attempt to send out calls using E.164 formatted numbers where trunks support this. See also Outbound Routes.

Personal tools
Namespaces
Variants
Actions
Toolbox