Unified Voicemail
From Taridium
This optional ipbx module is installed under Advanced Setup → Modules. Registered modules are displayed with registered module.
The Unified Voicemail (UVM) module allows you to use a single mailbox for multiple extensions as well as any mobile phone(s) and PSTN line(s) that support conditional call diversion.
Contents |
Requirements
Unified Voicemail requires individual DID/DDIs for each voicemail box that is to be integrated. This will be the Unified Access Number where the mailbox can be reached from any phone.
Configuration
Unified Voicemail (UVM) is configured in both Administrator's and End-User panels.
Inbound Routing
In order for ipbx to know about the UVM DID/DDIs you will need to setup some inbound routes. Go to Configuration → Inbound Routing to add (a) new route(s). This can be either a pattern or a single number with Local Destination Unified Voicemail. ipbx will automatically match up the inbound number with the configured Unified Access Number.
Assigning DID/DDIs to Mailboxes
In order for ipbx to know which mailbox uses which DID/DDIs you will need to associate mailboxes. Go to System → Voicemail → Edit Mailbox and enter the new Unified Access Number This needs to be of the exact same format as the inbound routing. Depending on whether you are using a PRI or other type of trunk, it might be necessary to apply extension transformations before you can match the number correctly.
Configuring Mailbox Access
To access your mailbox from your mobile/cellphone you will need to add a permissioned number to each user/mailbox.
Go to your End-User Panel e.g. http://mypbx/user/ and click on Voicemail → Settings → Voicemail Access and Callback Settings. Add your permissioned number. This needs to match the caller ID from your mobile phone for proper identification. A permissioned number can also be the callback number for mobile interface integration when using click to call in a mobile environment such as a PDA or Smartphone.
Configuring your Mobile Phone
Many mobile phones will allow you to configure your diverts/forwardings via your phone settings. This is often called conditional call divert. Consult your vendor's user guide for further details. If this is not exposed in a menu you can still change your mailbox on GSM phones by using common carrier codes. This will for example work on Apple's iPhone on almost any GSM compliant network.
Conditional Call Divert: Call Divert if no answer
**61*number*tt# to set the divert to your new UVM number. Use the tt value to set the delay to 5, 10, 15, 20, 25 or 30. *#61# To query the status of the diver ##61# To clear your divert
**62*number# to set the unavailable divert to your new UVM number *#62# To query the status of the diver ##62# To clear your divert
Conditional Call Divert: Call Divert if busy
**67*number# to set the busy divert to your new UVM number *#67# To query the status of the diver ##67# To clear your divert
Many phones will allow you to program your voicemail key for quick access, e.g. by a long press of 1.
