Bandwidth.com
From Taridium
This page describes how to configure your Taridium ipbx system with Bandwidth.com SIP Trunking Service.
Prerequisites
Properly installed ipbx system
If you have obtained your ipbx system directly from Taridium and have a valid maintenance or managed VoIP service contract, you can ask Taridium to perform this configuration for you.
Version Note
Bandwidth.com trunks require ipbx v. 2.0.1 or higher.
SIP trunking information provided by Bandwidth.com
- Primary, SIP proxy server IP address 216.82.224.202
- Secondary, SIP proxy server IP address 216.82.225.202
- Or, you can use DNS SRV ot.bandwidth.com (only the bandwidth.com EdgeMarc router supports this)
- Trunking DID(s)
Configuration
Navigate and login to the ipbx administrator interface (you will need admin class permissions). E.g.
http://[ip address of your pbx/ipbx/
Click on Configuration -> VoIP Trunks -> add SIP Trunk
Enter the following details:
- Trunk Name -> bandwidth-1
- Type -> friend
- Host -> 216.82.225.202
- Context -> incoming (default)
- Can Re-Invite -> no
- Insecure -> very
- Disallow -> all (enter or select all)
- Allow -> ulaw (enter or select ulaw)
Click on add trunk
