Bandwidth.com

From Taridium

This page describes how to configure your Taridium ipbx system with Bandwidth.com SIP Trunking Service.

Prerequisites

Properly installed ipbx system

If you have obtained your ipbx system directly from Taridium and have a valid maintenance or managed VoIP service contract, you can ask Taridium to perform this configuration for you.

Version Note

Bandwidth.com trunks require ipbx v. 2.0.1 or higher.

SIP trunking information provided by Bandwidth.com

• Primary, SIP proxy server IP address 216.82.224.202
• Secondary, SIP proxy server IP address 216.82.225.202
• Or, you can use DNS SRV ot.bandwidth.com (only the bandwidth.com EdgeMarc router supports this)
• Trunking DID(s)

Configuration

Navigate and login to the ipbx administrator interface (you will need admin class permissions). E.g.

http://[ip address of your pbx/ipbx/

Click on Configuration -> VoIP Trunks -> add SIP Trunk

Enter the following details:

Trunk Name -> bandwidth-1 Type -> friend Host -> 216.82.225.202 Context -> incoming (default) Can Re-Invite -> no Insecure -> very Disallow -> all (enter or select all) Allow -> ulaw (enter or select ulaw)

Click on add trunk