Bandwidth.com

From Taridium

Revision as of 14:48, 25 February 2009 (view source) Webmaster (Talk | contribs) (→Configuration) ← Older edit		Revision as of 14:49, 25 February 2009 (view source) Webmaster (Talk | contribs) (→Configuration) Newer edit →
Line 22:		Line 22:
	Navigate and login to the ipbx administrator interface (you will need admin class permissions). E.g.		Navigate and login to the ipbx administrator interface (you will need admin class permissions). E.g.
-	http://[ip address of your pbx/ipbx/	+	http://[ip address of your pbx]/ipbx/
	Click on '''Configuration''' -> '''VoIP Trunks''' -> '''add SIP Trunk'''		Click on '''Configuration''' -> '''VoIP Trunks''' -> '''add SIP Trunk'''

---

Revision as of 14:49, 25 February 2009

This page describes how to configure your Taridium ipbx system with Bandwidth.com SIP Trunking Service.

Prerequisites

Properly installed ipbx system

If you have obtained your ipbx system directly from Taridium and have a valid maintenance or managed VoIP service contract, you can ask Taridium to perform this configuration for you.

Version Note

Bandwidth.com trunks require ipbx v. 2.0.1 or higher.

SIP trunking information provided by Bandwidth.com

• Primary, SIP proxy server IP address 216.82.224.202
• Secondary, SIP proxy server IP address 216.82.225.202
• Or, you can use DNS SRV ot.bandwidth.com (only the bandwidth.com EdgeMarc router supports this)
• Trunking DID(s)

Configuration

Navigate and login to the ipbx administrator interface (you will need admin class permissions). E.g.

http://[ip address of your pbx]/ipbx/

Click on Configuration -> VoIP Trunks -> add SIP Trunk

Enter the following details:

1. Trunk Name -> bandwidth-1
2. Type -> friend
3. Host -> 216.82.225.202
4. Context -> incoming (default)
5. Can Re-Invite -> no
6. Insecure -> very
7. Disallow -> all (enter or select all)
8. Allow -> ulaw (enter or select ulaw)

Click on add trunk