Troubleshooting

From Taridium

Revision as of 17:14, 2 December 2008

Installation

Ioncube Loader Permission Error

Failed loading /usr/local/php-ioncube/ioncube/ioncube_loader_lin_5.1.so: /usr/local/php-ioncube/ioncube/ioncube_loader_lin_5.1.so: cannot restore segment prot after reloc: Permission denied

Try disabling SELinux in /etc/selinux/config

 SELINUX=disabled

To make this active you can either re-start your server or enter the following command:

 [root@pbx ~]#  setenforce 0

Conferencing

Personal Conference Rooms Disabled in End-User Panel

The end-user interface states that personal conference rooms have been disabled. Go to Applications -> Features -> Feature Map and map the feature Personal Conference Rooms as the prefix you wish to use for the rooms. The extension format is *[selected number prefix] + [extension number]

Invalid Conference Room

Ipbx claims the conference room number is invalid. This is usually a problem with the conferencing timing source. Meetme conferencing requires a timing source, either in the form of a Zaptel compatible timing source or using the pseudo timing device ztdummy.

 [root@ipbx ~]# service asterisk stop
 [root@ipbx ~]# modprobe ztdummy
 [root@ipbx ~]# cat /var/log/messages

and check for any errors, if you get an error message regarding the kernel version, you will have to re-compile the zaptel source for your kernel. Use our pre-compilation package zaptel-compile by entering

 [root@ipbx ~]# yum install zaptel compile

and try the modprobe command again. If there are no error you can start Asterisk again.

 [root@ipbx ~]# service asterisk start

To configure zaptel to start the timing source at boot edit /etc/sysconfig/zaptel and uncomment the appropriate line.