Advanced Setup: Configuration

From Taridium

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

== System Setup == To perform the basic system setup, go to Advanced Setup → Configuration === System Name === It is advisable to identify your system with a simple name. This will optionally be displayed on both administrator and user panels (display in header) === ipbx IP Address === This is the IP address or fully qualified domain name of your PBX server. If you have a public IP address assigned or port forwarding enabled, use your external IP address. === End User Panel === The End User Panel settings control access and features for the End User Interface. The end user interface can be accessed via http://myipaddress/user, where myipaddress is your server. === Voicemail === '''Display Voicemail PIN's in plain text''' will display Voicemail PIN's in plain text in the administrator interface. See System → Voicemail → Mailboxes. '''Default PIN Mode''' When creating users, ipbx will automatically assign Voicemail PIN's to users. These can be either the same as the mailbox number or a random 4 digit number. See System → Voicemail → Mailboxes. === System Default Caller ID === The system Default Caller ID will be used whenever there is no preset default caller ID. === Dialing === With '''Automatically transform dialed numbers to E.164 syntax''' ipbx will attempt to send out calls using E.164 formatted numbers whenever trunks support it. See also [[Routes|Outbound Routes]]. ==== Additional Line Templates ==== If you are using the Additional Line/Softphone Module you can select a template that will be used to create the additional user line.

Return to Advanced Setup: Configuration.